Bambu Lab P1S

Bambu Lab P1S overview

Two Bambu Lab P1Ses, Hakurei and Kirisame. Very good, fast FDM 3D printers.

Essential Information

  • Location: Ground Floor Workshop
  • Responsible Person(s): Dan Nixon
  • Induction Required: Yes
  • Build volume: 256mm x 256mm x 256mm
PrinterNozzle sizeLAN access codeFilament Options
Hakurei0.4mm22497498AMS compatible spools only
Kirisame0.4mm29623040AMS compatible spools or up to 3 Kg spools via top spool caddy

Usage notes

It is not permitted to leave this (or any other) 3D printer running whilst Maker Space is unoccupied!

3D printer filament supplied by Maker Space must be paid for. See 3D Printer Filament for details.

Induction checklist

  • General info
    • Filament availability, compatible filaments, price for Maker Space filament, options for using own filament
    • The requirement to not leave the machine running unattended
    • Do not remove the memory cards unless you want to get timelapse footage
  • Start up procedure
    • Power switch location
    • Verify no obstacles inside printer
  • Bambu Studio
    • Initial setup (if appropriate)
    • Adding our printers (use codes above, not the printer menu)
    • Configuring a basic print job
    • The requirement to ensure the AMS is synchronised
  • Filament loading
    • General filament handling, storage, the requirement to secure the loose end
    • Loading via the AMS
    • Loading vis the external spool
  • Start of job
    • The ability to skip full bed levelling
    • Build plate cleaning
    • Check for correct build plate seating
    • The requirement to observe the start of job and first layer
  • Fault handling
    • Where to see fault codes in Bambu Studio
    • The requirement to not attempt to maintain the printer
  • End of job
    • Removal of parts from bed
    • Ensure printer is left clean, serviceable and powered off